Bobrick B-6806.99×12 Grab Bar Technical Data
The Bobrick B-6806.99×12 is constructed of type-304 stainless steel with a peened grip. The grab bar has a wall thickness of 18-gauge (1.2mm) and an outside diameter of 1-1/2” (38mm). The bar leaves a gap of 1-1/2” (38mm) between the inside of the bar and the finished wall. The bar passes through the flanges and is heliarc welded to form a single structural unit. The flanges are 1/8” (3mm) thick stainless steel plate, 2” x 3-1/8” (79mm) in diameter and have two screw holes each. The flange covers are 11-gauge (0.8mm) and snap over the mounting flanges to conceal the screws. The grab bar has a 90º return to the flange.
Bobrick B-6806.99×12 Grab Bar Tech Data.pdf
Grab Bar Materials
Grab Bar — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel tubing with satin-finish. 1-1/2″ (38mm) outside diameter. Ends are heliarc welded to flanges.
Clearance between the grab bar and wall is 1-1/2″ (38mm).
Concealed Mounting Flanges — 18-8 S, type-304, 1/8″ (3mm) thick, stainless steel plate; end flanges 2″ x 3-1/8″ (50 x 80mm) with two holes for attachment
to wall. Intermediate flanges 2-5/8″ x 3-1/8″ (65 x 80mm) wide x 3-1/8″ (80mm) diameter.
Snap Flange Covers — 18-8 S, type-304, 22-gauge (0.8mm) drawn stainless steel with satin-finish. 3-1/4″ (85mm) diameter x 1/2″ (13mm) deep. Each cover
snaps over mounting flange to conceal mounting screws.