Description
MATERIALS:
Cabinet — 18-8, Type-304, heavy-gauge stainless steel. All-welded construction.
Door — 18-8, Type-304, 18-gauge (1.2mm) stainless steel with satin finish or matte black, as specified. 9/16″ (14mm) 90° return for
maximum rigidity. Secured to cabinet with a concealed, full-length, stainless steel piano-hinge. Equipped with a stainless steel cable
door-swing limiter and two tumbler locks keyed like other Bobrick washroom accessories. Tumbler locks flush with the door – no
protrusion.
Paper Towel Dispenser — 18-8, Type-304, 22-gauge (0.8mm) stainless steel with satin finish or matte black, as specified. Rounded
towel tray has hemmed opening to dispense paper towel without tearing. Capacity: 600 C-fold or 800 multifold paper towels. Unit
equipped with TowelMate consisting of a 90° return towel guide angle inside cabinet to prevent paper towels from falling forward out
when door is opened for servicing.
TowelMate® Towel Rod Assembly — Consisting of a round Nylon Rod and (2) stainless steel Rod Screws for attachment, is field
replaceable. Stainless steel Stop Screws (2) lock TowelMate Rod assembly in place. To retrofit TowelMate into existing install units
manufactured prior to Feb. 2021, order TowelMate Accessory Bobrick Model No. 3944-130.
Waste Container — Leak-proof rigid molded plastic. Removable for servicing. Capacity: 3.8-gal. (14.4-L).
OPERATION:
Paper towel dispenser is adjustable to dispense C-fold, multifold, or singlefold paper towels without use of additional adapters or
towel trays. To service waste receptacle, unlock door with key provided and remove waste container. Cable door-swing limiter prevents
damage to washroom accessories and walls.
INSTALLATION:
Provide framed rough wall opening 11-1/2” wide x 53-5/8” high (292 x 1362mm). Minimum recessed depth required from finish face
of wall is 3-3/4” (95mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall.
Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum
channel or other filler to eliminate gap between flange and finish face of wall. Mount cabinet with shims between framing and cabinet
at all points indicated by an S, then secure unit with #8 x 1-1/4″ (4.2 x 32mm) sheet-metal screws (not furnished).
